SINGLE EXTRUDER

> MACHINES > EPE-NPE FOAM EXTRUDER > TANDEM EXTRUDER

PE TECH FOAM Extrusion lines are used LDPE(Low density polyethylene) resins and foaming agent is ISO butane or Liquid propane gas. The almost expanded polyethylene foam density is 30 upto 33kgs per cubic meters and this density range is applied to protective packages and insulation materials. PE TECH tandem extrusion lines is controlled by HMI system, This process helps to control the extruder easier and it supplies one-click operation of whole system from HMI system.

EPE FOAM SINGLE EXTRUSION LINE

Feature

Model Workable width Foam Thickness Control Output
PTD-90 1,000~1,500mm 0.5~8mm PID 60~100kgs/hr
PTD-120 1,000~2,000mm 0.5~14mm PID 150~250kgs/hr
PTD-150 1,000~2,000mm 1~15mm PID 180~320kgs/hr
PTD-185 1,000~1,800mm 3~20mm PID 250~450kgs/hr

COMPONENTS OF PTD TANDEM EXTRUDER

  • Main Extruder unit
  • Hopper loader unit
  • Auto hydraulic screen changer
  • M-1 injection pump unit
  • Gas injection pump unit
  • Mandrel unit
  • Air-ring unit
  • Guide bar unit
  • Pull roller unit
  • Auto cutting unit (Option)
  • Main control enclosure
Advantages of PTD Single extruder machine - General EPE extrusion line has manual screen changer unit due to remove a foreign substance into cylinder barrel but our automatic screen changer is no need to waste a time for changing breaker plate. Within 1mins is possible to change new screen from old screen in our system and this function is also no need to break out machine.